VTC series- Vertical Turning Center
WELE Five Sides Family
WELE’s Five Sides Family of machines combine multiple axes and innovated tool management systems that allows machining of parts in a single setup environment, making them perfect for machining complex parts in small lot sizes.
For all product enquiries please call us on 01926 852725
WELE VIDEOS
SB Series
- The most economical equipment for 3 axes machining on this field.
- Economical multi-head exchange & storage with tool exchange function automatically upgrade to 5 sides function optional available on this series (M type).
- 5 sides work coordinate plane convert system auto attach with this optional function.
- Bridge casting made in one piece.
LB Series
- Economical multi-head exchange & storage with tool exchange function automatically upgraded to 5 sides function on this field. (M type)
- 5 side work coordinate plane convert system auto attached with this optional function as M type. Named as LB_ _ _M.
- Z travel has 1000mm, 1200mm & 1400mm available as an option.
- X travel can be provided up to 10 meter as required.
MB Series
- Full automatic Head Exchange / Head Storage / Auto tool exchange in vertical & horizontal / 5 sides machining function.
- Z travel with 1000mm as STD; Z travel from 1200mm thru 1400mm available on all MB series.
- Automatic multi head exchange system and storage with tool exchange in vertical and horizontal.
- All series with linear scale feedback system on X, Y axes; Z axis (OPT).
- Extension head, 30 degree head, and universal head optional available.
MVB Series
- Special design for extra size machining purpose.
- Z travel can be extended to 1400mm (55.1in) Max. height of distance between spindle nose and table top is 2400mm (94.4in)
- Minimize the overhang of the cross-rail and spindle carriage combination to increase the rigidity of the cutting performance.
- Max length of X travel can be up to 10000mm (393.7in).
- Dismantle before shipment is necessary. Any installation assistance might cost extra.
MG Series
- Moving overhead gantry bridge machine with max up to 20m in X axis and 5m in Y axis is available.
- Twin driven feed system on X axis travel up to 6000mm with ball screw; rack and pinion driven feed system available with travel 6000mm above.
- Automatic multi-head exchange and storage system, AC tilting head with 5 axes simultaneous control are all optional available on the field.
- Max. table load of 2500kg/m² is provided.
- Special foundation at the customer site is required.
- Patented backlash eliminated mechanism is applied on the X axis travel.
- FANUC/HENDENHAIN controllers are available in tilting head made in Germany. (MG-U series).
Latest Tweets
630 and 1530 versions of the U5-Advanced Series from SPINNER Werkzeugmaschinenfabrik GmbH under preparation at Whitehouse Machine Tools Ltd Good time to visit and inspect both versions #5axis #siemens pic.twitter.com/ZhSDc2rfkO
