AVEREX HS 500 Series
High-Speed Horizontal Machining Centers
A range of high performance Horizontal Machining Centres manufactured by a specialist company, Averex, founded by one of Taiwan’s most powerful businesses specifically to produce a machine which combines the best Japanese know-how and component parts (Fanuc, Tsubaki, THK, Tsudakoma, BIG Plus) with the efficient, lower cost manufacturing base of Taiwan.
The machines are designed not only meet customer’s machining requirements for today but can be expanded on site easily and affordably (with additional tool capacity and pallet pool) to meet their future needs as well.
For all product enquiries please call us on 01926 852725
AVEREX VIDEOS
HS-540i GTS
The HS-540iGTS is fully expandable, from 2 APC to 6 APC, and the standard 80 ATC to 120 or 220 ATC. The travels have been expanded, all while keeping the same small footprint as the HS-450 models.
- Large travels: X 800mm x Y 800mm x Z 800mm
- Large work envelope Ø800mm x 1,000mm
- One-piece stepped machine base with heavy ribbed
- 80 tools automatic tool changer
- Thermal compensation (chilled spindle, bailscrews and bearings)
- Air cutting through spindle
- Adopt 400mm / 500mm pallets
- 15,000 RMP spindle
- 1G acceleration
- 1 sec T-T change
- 5 sec pallet change
- 66.6 RPM full 4th
- 2,913 IPM rapid
More Information
HS-540i GTS-220T
HS-540i GTS-220T with new 8 Pallet Pool Expansion Unit.
- AVEREX-FANUC MPro I Controller with Value Packaged Features
- One-piece Stepped Machine Base with Heavy Ribbed
- Three Points Machine Leveling
- 100% Hand-scraping for Geometry Accuracy and Rigidity
- BBT Dual Surface Contact Spindle
- 1° Index Table (Optional 0.001° Full Rotary Table)
- THK® Roller Guide Ways
- TSUBAKI® Ballscrews
- Thermal Compensation (Chilled Spindle)
- Pressurized Oil-Air Lubrication Spindle, Ballscrews and Guide Ways
- Mechanical Lock Pallet Clamping System with Air Seal Detection
- Overhead Automatic Pallet Wash System
- 30 Bar Through Spindle Coolant, Prepared for Optional 70 Bar
HS-540i GTS 6APC
The HS-540iGTS 6APC is fully expandable from the standard 80 ATC to 120 or 220 ATC as needed to boost production efficiency.
- Large travels: X 800mm x Y 800mm x Z 800mm
- Large work envelope Ø800mm x 1,000mm
- One-piece stepped machine base with heavy ribbed
- 80 tools automatic tool changer
- Thermal compensation (chilled spindle, bailscrews and bearings)
- Air cutting through spindle
- Adopt 400mm / 500mm pallets
- 15,000 RMP spindle
- 1G acceleration
- 1 sec T-T change
- 5 sec pallet change
- 66.6 RPM full 4th
- 2,913 IPM rapid
More Information
HS-540K
The HS-540k boasts a one-piece machine base, powerful spindle, automatic tool changer, automatic pallet changer and AVEREX-FANUC MPro I / NC.
- Large travels: X 800mm x Y 800mm x Z 800mm
- Large work envelope Ø800mm x 1,000mm
- One-piece stepped machine base with heavy ribbed
- 46 tools automatic tool changer
- Thermal compensation (chilled spindle, bailscrews and bearings)
- Air cutting through spindle
- Adopt 400mm / 500mm pallets
- 15,000 RMP spindle
- 1G acceleration
- 1 sec T-T change
More Information
HS-630i 6APC
The HS-630i 6APC is the ultimate high speed horizontal machining center with powerful spindle, ATT, APC and AVEREX-FANUC MPro I / NC control
- Large travels: X 1,050mm x Y 900mm x Z 1,020mm
- Large work envelope Ø1,000mm x 1,300mm
- One-piece stepped machine base with heavy ribbed
- 60 tools automatic tool changer
- 2.5 sec T-T change
- Thermal compensation (chilled spindle, bailscrews and bearings)
- Air cutting through spindle
- 10,000 RMP Spindle, optional 8,000 RPM spindle
- 50mm/min rapid traverse
- 0.7G / 1.0G / 0.9G (X/Y/Z) acceleration
- THK© Roller guide ways
- TSUBAKI© core-cooled ballscrews
- 30 bar through spindle coolant, prepared for optional 70 bar
More Information
HS-450i
- Fast – The servo driven 1 second tool-to-tool automatic tool changer has a programmable high and low speed mode
- Reliable – Equipped with an 80-tool magazine as standard.
Servo driven magazine ensures fast and reliable tool indexing for 80 to 220 tools - Expandable – An optional 120 or 220 tool magazine is easily and economically field expandable
HS-450i-6APC
- Start with a standard 2 pallet machine with an 80 station tool changer and expand it to a 6 pallet machine with a variety of tool storage capacities (120 and 220 tools as options)
- Strength – Utilizes a Tsudakoma® rotary table, capable of handling both 400 mm and 500 mm pallets
- Reliable – Robust structure design driven by a simple and reliable hydraulic system
More Information
HS-630i
- Fanuc 31i with AICC 200 Block Look Ahead
- X/Y/Z 1,050 x 900 x 1,020mm
- 10,000-rpm BT50 spindle / 35KW/47HP 600NM
- 60 ATC, Full 4th axis, 30 Bar TSC
