Monday-Friday: 09:00 – 17:30
These terms and conditions outline the rules and regulations for the use of Whitehouse Machine Tools Ltd's Website.
By accessing this website we assume you accept these terms and conditions in full. Do not continue to use Whitehouse Machine Tools Ltd's website if you do not accept all of the terms and conditions stated on this page.
The following terminology applies to these Terms and Conditions, Privacy Statement and Disclaimer Notice and any or all Agreements: “Client”, “You” and “Your” refers to you, the person accessing this website and accepting the Company’s terms and conditions. “The Company”, “Ourselves”, “We”, “Our” and “Us”, refers to our Company. “Party”, “Parties”, or “Us”, refers to both the Client and ourselves, or either the Client or ourselves. All terms refer to the offer, acceptance and consideration of payment necessary to undertake the process of our assistance to the Client in the most appropriate manner, whether by formal meetings of a fixed duration, or any other means, for the express purpose of meeting the Client’s needs in respect of provision of the Company’s stated services/products, in accordance with and subject to, prevailing law of England. Any use of the above terminology or other words in the singular, plural, capitalisation and/or he/she or they, are taken as interchangeable and therefore as referring to same.
Like most website operators, Whitehouse Machine Tools collects non-personally-identifying information of the sort that web browsers and servers typically make available, such as the browser type, language preference, referring site, and the date and time of each visitor request. Whitehouse Machine Tools' purpose in collecting non-personally identifying information is to better understand how Whitehouse Machine Tools' visitors use its website. From time to time, Whitehouse Machine Tools may release non-personally-identifying information in the aggregate, e.g., by publishing a report on trends in the usage of its website.
Whitehouse Machine Tools also collects potentially personally-identifying information like Internet Protocol (IP) addresses for logged in users and for users leaving comments on wmtcnc.com blogs/sites. Whitehouse Machine Tools only discloses logged in user and commenter IP addresses under the same circumstances that it uses and discloses personally-identifying information as described below, except that commenter IP addresses and email addresses are visible and disclosed to the administrators of the blog/site where the comment was left.
We employ the use of cookies. By using Whitehouse Machine Tools Ltd's website you consent to the use of cookies in accordance with Whitehouse Machine Tools Ltd’s privacy policy.
Most of the modern day interactive web sites use cookies to enable us to retrieve user details for each visit. Cookies are used in some areas of our site to enable the functionality of this area and ease of use for those people visiting. Some of our affiliate / advertising partners may also use cookies.
Unless otherwise stated, Whitehouse Machine Tools Ltd and/or it’s licensors own the intellectual property rights for all material on Whitehouse Machine Tools Ltd. All intellectual property rights are reserved. You may view and/or print pages from http://www.wmtcnc.com for your own personal use subject to restrictions set in these terms and conditions.
You must not:
Redistribute content from Whitehouse Machine Tools Ltd (unless content is specifically made for redistribution).
We will approve link requests from these organisations if we determine that: (a) the link would not reflect unfavorably on us or our accredited businesses (for example, trade associations or other organisations representing inherently suspect types of business, such as work-at-home opportunities, shall not be allowed to link); (b)the organisation does not have an unsatisfactory record with us; (c) the benefit to us from the visibility associated with the hyperlink outweighs the absence of =$companyName?>; and (d) where the link is in the context of general resource information or is otherwise consistent with editorial content in a newsletter or similar product furthering the mission of the organisation.
These organisations may link to our home page, to publications or to other Web site information so long as the link: (a) is not in any way misleading; (b) does not falsely imply sponsorship, endorsement or approval of the linking party and it products or services; and (c) fits within the context of the linking party's site.
If you are among the organisations listed in paragraph 2 above and are interested in linking to our website, you must notify us by sending an e-mail to service@wmtcnc.com. Please include your name, your organisation name, contact information (such as a phone number and/or e-mail address) as well as the URL of your site, a list of any URLs from which you intend to link to our Web site, and a list of the URL(s) on our site to which you would like to link. Allow 2-3 weeks for a response.
Approved organisations may hyperlink to our Web site as follows:
No use of Whitehouse Machine Tools Ltd’s logo or other artwork will be allowed for linking absent a trademark license agreement.
Without prior approval and express written permission, you may not create frames around our Web pages or use other techniques that alter in any way the visual presentation or appearance of our Web site.
We reserve the right at any time and in its sole discretion to request that you remove all links or any particular link to our Web site. You agree to immediately remove all links to our Web site upon such request. We also reserve the right to amend these terms and conditions and its linking policy at any time. By continuing to link to our Web site, you agree to be bound to and abide by these linking terms and conditions.
If you find any link on our Web site or any linked web site objectionable for any reason, you may contact us about this. We will consider requests to remove links but will have no obligation to do so or to respond directly to you.
Whilst we endeavour to ensure that the information on this website is correct, we do not warrant its completeness or accuracy; nor do we commit to ensuring that the website remains available or that the material on the website is kept up to date.
We shall have no responsibility or liability for any content appearing on your Web site. You agree to indemnify and defend us against all claims arising out of or based upon your Website. No link(s) may appear on any page on your Web site or within any context containing content or materials that may be interpreted as libelous, obscene or criminal, or which infringes, otherwise violates, or advocates the infringement or other violation of, any third party rights.
To the maximum extent permitted by applicable law, we exclude all representations, warranties and conditions relating to our website and the use of this website (including, without limitation, any warranties implied by law in respect of satisfactory quality, fitness for purpose and/or the use of reasonable care and skill). Nothing in this disclaimer will:
The limitations and exclusions of liability set out in this Section and elsewhere in this disclaimer: (a) are subject to the preceding paragraph; and (b) govern all liabilities arising under the disclaimer or in relation to the subject matter of this disclaimer, including liabilities arising in contract, in tort (including negligence) and for breach of statutory duty.
To the extent that the website and the information and services on the website are provided free of charge, we will not be liable for any loss or damage of any nature.
If you have any queries regarding any of our terms, please contact us.
Company registration number: 02117070
Monday-Friday: 09:00 – 17:30
Whitehouse Machine Tools Ltd
Unit 7 Princes Drive Ind Est
Coventry Rd
Kenilworth
CV8 2FD
+44 (0)1926 852725
Whitehouse Machine Tools Ltd
Unit 7 Princes Drive Ind Estate
Kenilworth
Warwickshire
CV8 2FD
+44 (0)1926 852725
Latest #BROTHER high speed VMCs under preparation today at @wmtcnc pic.twitter.com/wheSDccHOB
Latest multi-axis Mill/Turn machine from #Spinner - the new Microturn pic.twitter.com/SG9eoA2wlF
Prove out on #BROTHER Speedio today, including Twin-Pot #pLLehmann #5axis tables and @BlumNovotestUK Digilog system #nothingfaster pic.twitter.com/IajcFdOeRW
Twin-Pot Twin Brothers #pLLehmann #Speedio #nothingfaster #Speedio pic.twitter.com/tyMGdAtZVw
Delivery day in Surrey, @RedlineCNC take delivery of a #Brother R650X2 twin pallet high efficiency machining centre and turnkey solution The twin pallet format of the R650X2 has increased OEE from 60% to over 90% compared to a single table machine #nothingfaster #speedio pic.twitter.com/ItYdqaXJED
This fully integrated twin-pot #5Axis solution from pL LEHMANN fits the BROTHER S700X2 perfectly, delivering two complete components per machine cycle, enhancing productivity On display and available for inspection this week at @wmtcnc Kenilworth Showroom #nothingfaster pic.twitter.com/eqU0b3AmQ0
The first example of the new F600X1 from #Brother being coupled with the ABB #Feedio automated cell pic.twitter.com/Mm9xfUhBuq
5-Axis, Mill-Turn, Automated Feedio cell being delivered today #brother #speedio #nothingfaster pic.twitter.com/Zd9QK666cB
Looking for a compact autoloaded solution for unmanned running on a high-speed #mutlitasking VMC with #5axis and #millturn capability? Look no further - see the unique BV-Stocker solution on the #BROTHER M200X3 machine in action youtube.com/watch?v=rPBmlS… Due into stock January
See (and hear) the new F600X1, the most rigid #Brother yet, in action machining #inconel To learn more about this new model and how it can help improve your efficiency and power consumption please contact us at @wmtcnc #speedio #nothingfaster youtube.com/watch?v=L2iAs_…
Multi-Tasking #Brother M200X3 in production, fed by @URobotsAPAC and running unmanned a week after delivery @UniteComponents #speedio #5axis #millturn #lightsout#nothingfaster pic.twitter.com/6CAfAYkPIH
Learn more about the new #Brother #PalletStocker system for use with their new integrated #Robot for cost effective automation of the #Speedio machines in this new MTDCNC film shot at the recent EMO MILANO 2021 exhibition gbr01.safelinks.protection.ou…
See the new #Brother F600X1 in action Heavy Milling Designed specifically for the machining of tougher materials, this most rigid #speedio to date delivers the cutting capability associated with conventional BT40 VMCs but at Brother speed youtu.be/DxxN4c1-0Pg via @YouTube
#5Axis U630 from @spinner installed today at leading Scottish sub-contract manufacturer: #GSBrownPrecision c/w Siemens 840D control, powerful 12K BT40 Spindle, 122ATC, simultaneous 5-Axis, scales on all axes, brake on tilting & turning axes, 70 bar CTS and Blum probing pic.twitter.com/WXL6iOAF6l
630 and 1530 versions of the U5-Advanced Series from SPINNER Werkzeugmaschinenfabrik GmbH under preparation at Whitehouse Machine Tools Ltd Good time to visit and inspect both versions #5axis #siemens pic.twitter.com/ZhSDc2rfkO
See the unique #Brother #5Axis #millturn M300X3 in action producing a Motor Case in one set-up youtube.com/watch?v=LGIDvd… #nothingfaster #speedio #exstock #multitasking